January 28 2022, 09:56#
Red Hat Enterprise Linux - How to Manually Re-enable Failed Paths Reported by Multipath
Lien : https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03113986
When running the multipath command several devices report failed paths. After Checking confirmed that the underlying storage devices were all online and available but the device mapper multipath layer did not automatically re-enable the paths. Although a full server reboot would recover access to all paths a non-disruptive manual procedure was preferred that could be performed online.
Supprimer un path
echo 1 > /sys/block/sdcu/device/delete
Puis rescan pour remonter le path
Tags : linux multipath san redhat lun